Ambition Mods Kil-Lite Boro AIO Mod Kit

Shop the new Kil-Lite Boro AIO Mod Kit, Collaboration by Ambition Mods x Kilic Customs
The Kil-Lite Boro Mod is a collaborative effort, designed by the high end designer of Kilic Customs and manufactured by Ambition Mods.

Available with either the Ambition mods proprietary chipset, or Evolv DNA60 chipset. Choose chipset when adding to cart.

Based on the KIL-BOX design, but with a 10-15% size reduction for light weight and slim hand feel! Light weight and sturdy aluminum construction.

The unique design follows the Kilic Customs design language, featuring a full trigger bar allowing users to fire the device with any finger they desire, or even the palm of their hand by squeezing the device.

Specifications

Size: 81.5 x 50 x 23mm (excluding drip tip)
Weight: 111.5 grams (excluding battery)
Battery Size: >> 18650 << (not included)
Ambition Mods Chipset Specifications:
Power Output: 1 to 60 Watts
Input Voltage Range: 3.0V to 4.2 Volts
Input Current: 0.5A to 30 Amps
Output Voltage: 0.5V to 8.0 Volts
Atomizer Resistance Range: 0.2Ω to 3.0 Ohms
Screen Size: 0.91″ OLED
Wire Material Support: Ka1 Kanthal A1, N80 NiChrome, Nickel 200, 316 Stainless Steel, and Grade 1 Titanium
Evolv DNA Chipset Specifications:
Data Port: No
Preheat/Boost Mode Enabled: Yes
Reverse Polarity Protection: Yes
Low Resistance (Short Circuit) Protection: Yes
Overheat Protection: Yes
Low Voltage Protection: Yes
Power Output: 1 to 60 Watts
Output Efficiency: 85%
Temperature Range: 200-600°F / 93 – 315°C
Input Voltage Range: 3.0V to 4.2 Volts
Input Current: 0.5A to 32 Amps
Output Voltage: 0.2V to 9.0 Volts
Atomizer Resistance Range (Power Mode): 0.1Ω to 3.0 Ohms (0.25Ω Typical)
Atomizer Resistance Range (TC Mode): 0.05Ω to 3.0 Ohms (0.15Ω Typical)
Screen Size: 0.91″ OLED
Screen Resolution: 128×32
Wire Material Support: Ka1 Kanthal A1, N80 NiChrome, Ni200 Nickel, Grade 1 Titanium, 316 Stainless Steel, more to be announced

Package Contents:
1x Kil-Lite Mod
2x Spare Magnets
2x Battery Wraps
1x User Manual